Clean Max

Chlorinated Alkaline Cleaner

Formula ingredients contain no phosphorus.

FOR INDUSTRIAL USE ONLY

Directions For Use

For use only with 304 and 316 stainless steel processing equipment. For circulation and spray cleaning, circulate solution using Clean Max at 3.9 mL/L (1 US fl oz/2 US gal) water at 60-66°C (140-150°F) for 20 minutes. Drain and rinse thoroughly with cold water. Follow with a sanitizing solution of Ecolab recommended product. For Foam Cleaning, rinse equipment with warm water. Prepare foam solution using Clean Max at 15.6-31.3 mL/L (204 US fl oz/US gal) water, and Ecolab recommended foam additive at a rate of 7.8 mL/L (1 US fl oz/US gal) water.

This product is not for use as hard surface disinfectant or sanitizer.

KEEP OUT OF REACH OF CHILDREN

Danger

Causes severe skin burns and eye damage.

Wash skin thoroughly after handling. Wear protective gloves/ protective clothing/ eye protection/ face protection.

Mixing this product with acid or ammonia releases chlorine gas.

IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor/ physician. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/ physician. Wash contaminated clothing before reuse.

READ SAFETY DATA SHEET (SDS) BEFORE USING THIS PRODUCT

EMERGENCY HEALTH INFORMATION: 1 800 328 0026. If located outside the United States and Canada, call collect 1 651 222 5352 (number is in the US).

Manufactured for: Aspen Veterinary Resources^®, Ltd., 3155 Heartland Drive, Liberty, MO 64068

1-800-203-5620

CPN: 1833028.0