Skip to Content

Enzyclean

This page contains information on Enzyclean for veterinary use.
The information provided typically includes the following:
  • Enzyclean Indications
  • Warnings and cautions for Enzyclean
  • Direction and dosage information for Enzyclean

Enzyclean

This treatment applies to the following species:
Company: Micro-Scientific

Protease Enzyme

Low Suds Detergent

Enzyclean® Protease Enzyme Low Suds Detergent is specially formulated for use as a presoak or manual detergent and for use in ultrasonic washers, automatic washing equipment and evacuators. Enzyclean® is safe for glass, plastic, rubber and all types of metal surgical instruments, as well as flexible and rigid fiber optic equipment. The protease enzyme in Enzyclean® breaks down organic and inorganic soils, residues, films and deposits and ensures thorough and complete cleaning, leaving instruments moving freely and spot-free.

● Concentrated

● Low-foaming

● Neutral pH

● Protease enzyme

● Rust-inhibiting

● Rinses spot-free

● Phosphate free

● Biodegradable solution

Directions For Use

Wear appropriate personal protective equipment based on safe work practices.

Presoak and Manual Cleaning: Add 1/8 fl. oz. (3.7 mL) to 2 fl. oz. (59 mL) per gallon (3.8 L) of warm water. Soak instruments for 2-3 minutes or longer if required. Solution should be aspirated through lumens and channels of instruments. Scrub instruments under water and rinse thoroughly with warm water, aspirating water through channels to completely remove all traces of enzymatic solution. Dry instruments thoroughly if they are to be chemically disinfected. Discard solution after each use, or when visibly soiled.

Ultrasonic Cleaning: Add 1/8 fl. oz. (3.7 mL) to 2 fl. oz. (59 mL) per gallon (3.8 L) of water and follow equipment manufacturer’s instructions. Recommended temperature range: 90°F-140°F (32°C-60°C). Lid should be closed during use. Discard solution after each use or when visibly soiled.

Automatic Washing Equipment: Add 1/8 fl. oz. (3.7 mL) to 2 fl. oz. (59 mL) per gallon (3.8 L) of water and follow equipment manufacturer’s instructions. Recommended temperature range: 90°F-140°F (32°C-60°C). Validated cleaning is recommended.

Evacuators: Add 1/8 fl. oz. (3.7 mL) to 2 fl. oz. (59 mL) per gallon (3.8 L) of water. Insert evacuator hose, turn system on full open for 1 minute. Suggested maintenance twice weekly.

Dilutions vary depending on temperature, water quality and equipment.

DANGER

May cause allergy or asthma symptoms or breathing difficulties if inhaled.

Precautionary Statement(s): Avoid breathing dust/fume/gas/mist/vapors/spray. In case of inadequate ventilation wear respiratory protection. If inhaled: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms: Call a poison center or doctor. Dispose of contents and container in accordance with all local, regional, national and international regulations.

4% of the mixture consists of ingredient(s) of unknown acute toxicity.

KEEP OUT OF REACH OF CHILDREN.

See SDS for additional information.

Store in a cool, dry area.

Emergency Phone Number

24-Hour Number: 1-800-535-5053

International: 1-352-323-3500

Made in the U.S.A.

Manufacturer: Micro-Scientific, LLC, 755 Tri-State Parkway, Gurnee, IL 60031 USA

888-253-2536

www.micro-scientific.com

 

ORDER NO.

 

1 Gallon (3.8 L)

EBL1

EBL1-83976A-0216

CPN: 1524009.0

MICRO-SCIENTIFIC, LLC
755 TRI-STATE PARKWAY, GURNEE, IL, 60031
Toll-Free:   1-888-253-2536
Website:   www.micro-scientific.com
Email:   info@micro-scientific.com
Every effort has been made to ensure the accuracy of the Enzyclean information published above. However, it remains the responsibility of the readers to familiarize themselves with the product information contained on the US product label or package insert.

Copyright © 2019 Animalytix LLC. Updated: 2019-09-30

Hide