Chemspec Urine Contamination Treatment (Canada)This page contains information on Chemspec Urine Contamination Treatment for veterinary use.
The information provided typically includes the following:
- Chemspec Urine Contamination Treatment Indications
- Warnings and cautions for Chemspec Urine Contamination Treatment
- Direction and dosage information for Chemspec Urine Contamination Treatment
Chemspec Urine Contamination TreatmentThis treatment applies to the following species:
RTU pH 7.4
Neutralizes urine odors.
For professional use only. Keep out of reach of children. Read directions and cautions before use. Before application, pretest for colorfastness in an inconspicuous area.
Directions For Use
1. Determine the location of the urine contamination with an ultraviolet lamp (black light), or a moisture detector.
2. Mix 1 qt. (0.9 L) product with 2 qt. (1.8 L) water and saturate each urine spot with the solution.
3. Clean carpet using hot water extraction method. Repeat application in specific areas if needed.
Chemspec Urine Contamination Treatment Caution
Use product only in well-ventilated area. To avoid skin irritation or slip hazards, do not walk on wet carpets with bare feet.
NOTICE: Product must be stored at 59°F - 86°F (15°C - 30°C). Keep in sealed container when not in use. Product is not warranted if used for repack, improperly stored, or used in a manner not consistent with manufacturer’s instructions. Dispose of unused product and waste water according to applicable local, state and federal regulations.
CONTAINS: water (CAS 7732-18-5); 2-(2-butoxyethoxy) ethanol (CAS 112-34-5); sodium (c14-16) olefin sulfonate (CAS 68439-57-6); fragrance; dipropylene glycol butyl ether (CAS 29911-28-2); propylene glycol (CAS 57-55-6alpha-terpineol (CAS 98-55-5), oleic acid (CAS 112-80-1); benzyl alcohol; 4-allyl-2-methoxyphenol; benzyl salicylate; amyl cinnamal; sodium hydroxide; citronellol; 2,6-octadien-1-ol, 3,7-dimethyl-, (e)-; 1,6-octadien-3-ol, 3,7-dimethyl; butylphenyl methylpropional; 2-propenal, 3 phenyl-
Urine Contamination Treatment
Causes skin irritation. Causes serious eye irritation.
Prevention: Wash face, hands and any exposed skin thoroughly after handling. Wear protective gloves/clothing and eye/face protection.
Response: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice / attention. IF ON SKIN: Wash with plenty of water and soap. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse.
If condition(s) persists: Get medical advice / attention. More detailed First Aid measures may be found in Section 4 of the SDS.
Read SDS at LegendBrands.com
For chemical emergency call:
1-800-535-5053 (North America)
Made in U.S.A.
© 2022 Legend Brands
Legend Brands, 15180 Josh Wilson Road, Burlington, WA 98233
Legend Brands, 4520 Eastgate Parkway, Mississauga, ON L4W 3W6
1 Qt (946 mL)
P. 2203 D
1 Gallon (3.8 L)
4520 EASTGATE PARKWAY, MISSISSAUGA, ON, L4W 3W6
Copyright © 2023 Animalytix LLC. Updated: 2023-05-30