Skip to main content

Enzyclean IV

This page contains information on Enzyclean IV for veterinary use.
The information provided typically includes the following:
  • Enzyclean IV Indications
  • Warnings and cautions for Enzyclean IV
  • Direction and dosage information for Enzyclean IV

Enzyclean IV

This treatment applies to the following species:
Company: Micro-Scientific

Multiple Enzyme Detergent

Enzyclean® IV Multiple Enzyme Detergent is specially formulated for use as a presoak or manual detergent and for use in ultrasonic washers, automatic washing equipment and evacuators. Enzyclean® IV Multiple Enzyme Detergent is safe for glass, plastic, rubber and all types of metal surgical instruments, as well as flexible and rigid fiber optic equipment. The protease, lipase, amylase and cellulase enzymes in Enzyclean® IV break down organic and inorganic soils, residues, films and deposits and ensure thorough and complete cleaning, leaving instruments moving freely and spot-free.

● Concentrated

● Low-foaming

● Protease, lipase, amylase, cellulase enzymes

● Neutral pH

● Rust-inhibiting

● Rinses spot-free

● Phosphate free

● Biodegradable solution

Directions For Use

Wear appropriate personal protective equipment based on safe work practices.

Presoak & Manual Cleaning: Add 1/8 fl. oz. (3.7 mL) to 2 fl. oz. (59 mL) per gallon (3.8 L) of warm water. Soak instruments for 2-3 minutes or longer if required. Solution should be aspirated through lumens and channels of instruments. Scrub instruments under water and rinse thoroughly with warm water, aspirating water through channels to completely remove all traces of enzymatic solution. Dry instruments thoroughly if they are to be chemically disinfected. Discard solution after each use, or when visibly soiled.

Ultrasonic Cleaning: Add 1/8 fl. oz. (3.7 mL) to 2 fl. oz. (59 mL) per gallon (3.8 L) of water and follow equipment manufacturer’s instructions. Recommended temperature range: 90°F-140°F (32°C-60°C). Lid should be closed during use. Discard solution after each use or when visible soiled.

Automatic Washing Equipment: Add 1/8 fl. oz. (3.7 mL) to 2 fl. oz. (59 mL) per gallon (3.8 L) of water and follow equipment manufacturer’s instructions. Rinse thoroughly after cleaning. Recommended temperature range: 90°F-140°F (32°C-60°C). Validated cleaning is recommended.

Evacuators: Add 1/8 fl. oz. (3.7 mL) to 2 fl. oz. (59 mL) per gallon (3.8 L) of water. Insert evacuator hose, turn system on full open for 1 minute. Suggested maintenance twice weekly.

Dilutions vary depending on temperature, water quality and equipment. Validated cleaning is recommended.


May cause allergy or asthma symptoms or breathing difficulties if inhaled.

Precautionary Statement(s): Avoid breathing dust/fume/gas/mist/vapors/spray. In case of inadequate ventilation wear respiratory protection. If inhaled: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms: Call a poison center/doctor. Dispose of contents/container in accordance with local/regional/national/international regulations.

5% of the mixture consists of ingredient(s) of unknown acute toxicity.


See SDS for additional information.

Store in a cool, dry area.

Emergency Phone Number

24-Hour Number: 1-800-535-5053

International: 1-352-323-3500

Made in the U.S.A.

Manufacturer: Micro-Scientific, LLC, 755 Tri-State Parkway, Gurnee, IL 60031 USA




1 Gallon (3.8 L)


CPN: 1524008.0

Toll-Free:   1-888-253-2536
THIS SERVICE AND DATA ARE PROVIDED "AS IS". DVMetrics assumes no liability, and each user assumes full risk, responsibility, and liability, related to its use of the DVMetrics service and data. See the Terms of Use for further details.

Copyright © 2023 Animalytix LLC. Updated: 2023-05-29