Enforce LP
This treatment applies to the following species:Chlorinated Alkaline Cleaner
● Low phosphate level
● Combination of chlorine and alkaline builders
Danger
KEEP OUT OF REACH OF CHILDREN
FOR INDUSTRIAL USE ONLY
KEEP FROM FREEZING
Foam/Gel Cleaner
Formula ingredients contain no phosphorus.
RATINGS:
0 - Minimum
1 - Slight
2 - Significant
3 - Serious
4 - Extreme
3 HEALTH
0 FIRE
0 REACTIVE
Personal protection equipment

Contains: water, 7732-18-5; sodium hydroxide, 1310-73-2; sodium hypochlorite, 7681-52-9; amines, coco alkyldimethyl, n-oxides, 61788-90-7; polyacrylic acid, sodium salt, 9003-04-7; xylenesulfonic acid, sodium salt, 1300-72-7.
Directions For Use
Foam Cleaning
1. Dismantle equipment for cleaning and pre-rinse to remove all loose soil.
2. Foam all equipment surfaces with Enforce LP mixed at 2 to 5 oz per gallon (15.6 - 39.1 mL/L) of water. Allow foam to soak 5 to 15 minutes. Do not allow foam to dry.
3. Rinse thoroughly with potable water.
4. Sanitize prior to start-up with an EPA registered product.
Spray Cleaning
1. Dismantle equipment for cleaning and pre-rinse to remove all loose soil.
2. Spray equipment with an Enforce LP solution at a concentration of 1 to 2 oz per gallon (7.8 - 15.6 mL/L) of water.
3. Rinse thoroughly with potable water.
4. Sanitize prior to start-up with an EPA registered product.
Soak Cleaning
1. Pre-rinse parts to remove loose soil.
2. Soak parts in Enforce LP solution at a concentration of 2 to 4 oz per gallon (15.6 - 31.3 mL/L) of water. Water temperature should be 100°F to 120°F (38° - 49°C).
3. Rinse thoroughly with potable water.
4. Assemble equipment and sanitize prior to start-up with an EPA registered product.
Avoid food contamination during application and storage. Do not store in food processing areas.
Rinse surfaces thoroughly with potable water after use.
This product is not for use as hard surface disinfectant or sanitizer.
Consult your Ecolab representative for specific use instructions and recommended dispensing equipment.
Danger
Causes severe skin burns and eye damage. Toxic to aquatic life.
Wear protective gloves. Wear eye or face protection. Wear protective clothing. Avoid release to the environment. Wash hands thoroughly after handling. Mixing this product with acid or ammonia releases chlorine gas.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician. IF SWALLOWED: Immediately call a POISON CENTER or physician. Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. Wash contaminated clothing before reuse. Immediately call a POISON CENTER or physician. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or physician.
READ MATERIAL SAFETY DATA SHEET (MSDS) BEFORE USING THIS PRODUCT
EMERGENCY HEALTH INFORMATION: 1 800 328 0026. If located outside the United States and Canada, call collect 1 651 222 5352 (number is in the US).
This product may be patented: www.ecolab.com/patents
Ecolab, 1 Ecolab Place, St. Paul MN 55102 USA
tel. 1 800 392 3392
© 2017 Ecolab USA Inc.
All rights reserved
Made in U.S.A.
www.ecolab.com
18.9 L (5 US GAL) |
6300665 |
753918/5301/0314 753922/5301/0917 |
208 L (55 US GAL) |
6300666 |
753919/5301/0314 753922/5301/0917 |
1150 L (304 US GAL) |
6300667 |
753920/5301/0314 753922/5301/0917 |
CPN: 1449044.0
ECOLAB PLACE, EGH 9, ST. PAUL, MN, 55102
Telephone: | 888-367-2499 | |
Technical Assistance: | 651-293-2818 | |
Fax: | 651-293-2260 | |
Website: | www.ecolab.com |
![]() |
THIS SERVICE AND DATA ARE PROVIDED "AS IS". DVMetrics assumes no liability, and each user assumes full risk, responsibility, and liability, related to its use of the DVMetrics service and data. See the Terms of Use for further details. |
Copyright © 2025 Animalytix LLC. Updated: 2025-03-02