Backflush

Low-Foaming Backflush Cleaner

Formula ingredients contain not more than 7.8% Phosphorus, 0.7 g/L, (2.8 g/US gal) of recommended use concentration.

FOR INDUSTRIAL USE ONLY

Directions For Use

1. Pre-rinse the milker unit thoroughly.

2. Flush the milker unit with a thoroughly mixed solution of 1 ounce (30 mL) Backflush to 13 gallons (49 L) of water. Provides 25 ppm titratable iodine.

3. Allow 30 seconds contact time.

4. Rinse with potable water and drain thoroughly.

Avoid food contamination during application and storage. Do not store in food processing areas.

Rinse surfaces thoroughly with potable water after use.

KEEP OUT OF REACH OF CHILDREN

Danger

Causes severe skin burns and eye damage.

Wash skin thoroughly after handling. Wear protective gloves/ protective clothing/ eye protection/face protection. Do not mix with bleach or other chlorinated products - will cause chlorine gas.

IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Remove/ Take off immediately all contaminated clothing. Rinse skin with water/ shower. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/ physician. Wash contaminated clothing before reuse.

READ SAFETY DATA SHEET (SDS) BEFORE USING THIS PRODUCT

EMERGENCY HEALTH INFORMATION: Contact local poison control.

Manufactured for: Aspen Veterinary Resources^®, Ltd., 3155 Heartland Drive, Liberty, MO 64068

1-800-203-5620

CPN: 1833000.0