Skip to main content

Achieve (Canada)

This page contains information on Achieve for veterinary use.
The information provided typically includes the following:
  • Achieve Indications
  • Warnings and cautions for Achieve
  • Direction and dosage information for Achieve


This treatment applies to the following species:
Company: Agrisan SC Pharma


Pre and Post-Milking Antiseptic Teat Solution


WARNINGS: No meat withdrawal period or milk withholding time is required when used according to the label. Avoid contact with food. Do not take internally. If accidentally ingested, drink large volumes of water. Avoid contact with skin and eyes. If accidental contact occurs, flush thoroughly with running water. Seek medical attention immediately after oral exposure or contact with skin and eyes. Avoid breathing vapours. Do not use for cleaning and/or sanitizing milking equipment. Keep out of reach of children.


Iodine 0.5% w/w (from Alkyl Poly Ethoxy Ethanol - Iodine Complex)

EMOLLIENTS: Glycerin 2% w/w

INDICATIONS: ACHIEVE is a pre and post-milking antiseptic teat solution to be used as an aid in reducing the spread of organisms which may cause mastitis in dairy cattle.

DIRECTIONS FOR USE: PRE-MILKING: Use at full strength. Do not dilute.

Before milking, apply ACHIEVE to each teat, ensuring complete coverage of all teats with the solution. After 15 to 30 second, dry each teat thoroughly. If the udder and teats are heavily soiled, clean with an antiseptic udder wash and dry thoroughly before application of ACHIEVE.

POST-MILKING: Use at full strength. Do not dilute.

Apply ACHIEVE to each teat immediately after milking. Ensure that the solution thoroughly covers the entire surface of all teats. Allow teats to dry. Do not wipe. If outside temperature is below 0°C, allow to air dry on the teats before turning cows out to cold weather to prevent freezing. When a cow is being dried off, continue the application of ACHIEVE to all teats once daily for 1 to 2 weeks as required after the last milking. With freshening cows, resume application of ACHIEVE to all teats twice daily for 7 to 10 days before calving.

A fresh solution should always be used at each milking. The application equipment should be cleaned and rinsed properly after each milking session or when the solution becomes contaminated. Do not pour remaining solution back into the original container. Keep container closed to prevent contamination of the product.

CAUTIONS: For external use only. If cow’s teats are sore, irritated or chapped, consult a veterinarian before starting or continuing to use antiseptic teat solution.

STORAGE CONDITIONS: Store between 2°C and 30°C. Keep from freezing. Store in a cool, dry, clean area. Keep away from direct sunlight and heat to avoid deterioration. Keep container tightly closed.

Manufactured by: Agrisan Specialty Chemical & Pharmaceutical, 451 Smith Street, P.O. Box 69, Arthur, Ontario N0G 1A0

Tel: 1-877-731-7194

DIN 02487918


NET CONTENTS: 18.9L / 55L / 205L / 1040L

Version: 02 19-06-2019

CPN: 1551017.0

Telephone:   519-848-2453
Toll-Free:   877-731-7194
Fax:   519-848-2780
THIS SERVICE AND DATA ARE PROVIDED "AS IS". Animalytix assumes no liability, and each user assumes full risk, responsibility, and liability, related to its use of the Animalytix service and data. See the Terms of Use for further details.

Copyright © 2024 Animalytix LLC. Updated: 2024-02-27