WARNING: For breathing support when used by properly trained personnel. For medical applications, Rx only. Administration of Medical Air may be hazardous or contraindicated. For use only by or under the supervision of a licensed practitioner who is experienced in the use and adminiatration of Medical Air and is familiar with the indications, effects, dosages, methods, and frequency and duration of administration, and with the hazards, contraindications and side effects, and the precautions to be taken.
WARNING: CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED. SUPPORTS COMBUSTION. Do not handle until all safety precautions have been read and understood. Use a back flow preventive device in the piping. Use only with equipment of compatible materials of construction and rated for cylinder pressure. Close valve after each use and when empty. Protect from sunlight when ambient temperature exceeds 52°C (125°F). Read and follow the Safety Data Sheet (SDS) before use.
Un-Coded Section
CONTENTS:
Cylinder Type
Liters
T
8066
[_]
K
6056
[_]
M
3000
[_]
______
______
______
Distributed by: Linde Gas North America LLC 200 Somerset Corporate Blvd., Suite 7000 Bridgewater, NJ 08807 866.543.3427
MG009G
Linde UN1002 CAS 132259-10-0
MEDICAL AIR USP
Distributed by: Linde Gas North America LLC 200 Somerset Corporate Blvd., Suite 7000 Bridgewater, NJ 08807 866.543.3427
MEDICAL GAS
WARNING: For breathing support when used by properly trained personnel. For medical applications, Rx only.
Administration of Medical Air may be hazardous or contraindicated. For use only by or under the supervision of a licensed practitioner who is experienced in the use and adminiatration of Medical Air and is familiar with the indications, effects, dosages, methods, and frequency and duration of administration, and with the hazards, contraindications and side effects, and the precautions to be taken.
WARNING: CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED. SUPPORTS COMBUSTION. Do not handle until all safety precautions have been read and understood. Use a back flow preventive device in the piping. Use only with equipment of compatible materials of construction and rated for cylinder pressure. Close valve after each use and when empty. Protect from sunlight when ambient temperature exceeds 52°C (125°F). Read and follow the Safety Data Sheet (SDS) before use.