Totacide-28 (Canada)This page contains information on Totacide-28 for veterinary use.
The information provided typically includes the following:
- Totacide-28 Indications
- Warnings and cautions for Totacide-28
- Direction and dosage information for Totacide-28
Totacide-28This treatment applies to the following species:
FOR INDUSTRIAL AND INSTITUTIONAL USE ONLY
COLD STERILIZER AND DISINFECTANT
RAPID ACTION - NON-RUSTING - NON-STAINING
SPORICIDAL, FUNGICIDAL, TUBERCULOCIDAL, VIRUCIDAL, BACTERICIDAL, PSEUDOMONACIDAL
Patent No: 1,017,670
MUST BE ACTIVATED BEFORE USING
FOLLOW DIRECTIONS - STORE AT ROOM TEMPERATURE (15°-30°C)
Directions For Use
Content of attached bottle must be added to this container of TOTACIDE-28 to activate it. Shake well. Solution will exhibit fluorescent yellow-green colour indicating that it is ready for use. Before sterilization and disinfection of instruments and equipment, remove gross contamination and clean thoroughly. Rinse and damp dry objects before immersing in undiluted TOTACIDE-28 to which activator has been added. Use covered containers to minimize evaporation and prevent contamination. When removing objects from TOTACIDE-28 solution, use aseptic hospital procedures and RINSE OBJECTS THOROUGHLY inside and out, with sterile water prior to use.
Completely immerse previously cleaned objects in a fresh undiluted TOTACIDE-28 solution to which activator has been added, for a minimum of TEN (10) hours, to destroy resistant pathogenic spores including Cl. sporogenes, bacillus subtilis, Cl. tetani, Cl. Welchii.
TO DISINFECT AND TERMINALLY DECONTAMINATE:
Completely immerse previously cleaned objects in undiluted TOTACIDE-28 to which activator has been added, for a minimum of TEN (10) minutes, to destroy vegetative pathogens including Pseudomonas aeruginosa, Trichophyton mentagrophytes, viruses including Herpes simplex, Vaccinia and Adenovirus and other pathogenic bacteria and fungi.
For the destruction of Bacterium tuberculosis expose objects for a minimum of 45 minutes at 20°C in a fresh undiluted TOTACIDE-28 solution.
NOTE: pH Range of Activated Product: 6.5-7.4.
Rinse empty container thoroughly with water before discarding. Do not immerse carbon steel objects over 24 hours. TOTACIDE-28 solution contains a rust inhibitor, but will not prevent or remove rust caused by poor plating or improper care of instruments.
DANGER - KEEP OUT OF REACH OF CHILDREN
INGESTION - If swallowed, promptly drink large quantities of milk, or egg whites or gelatin solution or if they are not available, drink large quantities of water. Induce vomiting. Consult a physician immediately.
SKIN - Avoid skin contact as irritation and the possibility of sensitization exist. If skin contact occurs, flush thoroughly with water.
EYES - In case of contact with eyes, flush well with water and seek medical attention immediately.
INHALATION - Use in ventilated areas.
FOOD - Avoid contact with food.
* Registered Trademark / Authorized User
MANUFACTURED BY: WEST PENETONE INC., 10,900 RUE SÉCANT ST., VILLE D’ANJOU, QUÉBEC H1J 1S5
Branches in principal cities
MADE IN CANADA
NAC No.: 13420040
10,900 SECANT STREET, MONTREAL (ANJOU), QC, H1J 1S5
|Every effort has been made to ensure the accuracy of the Totacide-28 information published above. However, it remains the responsibility of the readers to familiarize themselves with the product information contained on the Canadian product label or package insert.|
Copyright © 2016 North American Compendiums. Updated: 2016-10-31