Skip to main content

Powerfoam S with Glutaraldehyde (Canada)

This page contains information on Powerfoam S with Glutaraldehyde for veterinary use.
The information provided typically includes the following:
  • Powerfoam S with Glutaraldehyde Indications
  • Warnings and cautions for Powerfoam S with Glutaraldehyde
  • Direction and dosage information for Powerfoam S with Glutaraldehyde

Powerfoam S with Glutaraldehyde

This treatment applies to the following species:
Company: Vetoquinol

WITH GLUTARALDEHYDE

Commercial Use Only

DIN 02426161

MULTI-PURPOSE DISINFECTANT-CLEANER

Active Ingredients

Alkyl (C12 67%, C14 24%, C16 17%, C18 1%) dimethyl benzyl ammonium chloride

13.00%

Alkyl (C12 67%, C14 24%, C16 17%, C18 1%) dimethyl ethylbenzyl ammonium chloride

13.00%

Glutaraldehyde

7.00%

Powerfoam S with Glutaraldehyde disinfectant-cleaner is specifically formulated for industrial use in the following animal and swine producing facilities as well as the following equipment in these facilities: Waterers, Feeders, Hauling Equipment, Loading Equipment, Farrowing Barns, Nurseries, Blocks, Creep Areas, and Chutes.

KEEP OUT OF REACH OF CHILDREN

NFPA HAZARD CLASSIFICATION:

HEALTH

FIRE

REACTIVITY

SPECIFIC

3

1

1

None

DANGER

CORROSIVE

TDG SHIPPING NAME

UN3265, CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S., (Alkyl dimethyl benzyl ammonium chloride; Alkyl dimethyl ethylbenzyl ammonium chloride), 8, PG III

Description

Powerfoam S with Glutaraldehyde is a multi-purpose disinfectant-cleaner. Powerfoam S with Glutaraldehyde provides effective extermination of bacteria and cleaning in one operation. Powerfoam S with Glutaraldehyde is effective in warm, soft or hard water (as much as 1000 ppm CaCO3) and performs especially well in areas containing 5% serum. Powerfoam S with Glutaraldehyde is for use on glazed ceramic and tile surfaces, stainless steel, aluminum, chrome, galvanized metal, tin, brass, zinc, glass, hard non-porous treated wood, polyethylene, polypropylene, PVC (polyvinyl chloride), vinyl, fiberglass, Viton, ethylene propylene, nitrate, acrylic and polyurethane.

Directions For Use

Registered for disinfecting and cleaning hard non-porous surfaces. Not for use on feed, food or litter. Powerfoam S with Glutaraldehyde disinfectant-cleaner is specifically formulated for industrial use in the following Animal and Swine Producing Facilities as well as the following equipment in these facilities: Waterers, Feeders, Hauling Equipment, Dressing Plants, Loading Equipment, Farrowing Barns, Nurseries, Blocks, Creep Areas, and Chutes. To disinfect and clean hard non-porous surfaces of walls, floors, tables, sinks, refrigerator exteriors, telephone booths and garbage cans in non-animal areas associated with the sites noted above. Apply a solution of 4 mL of Powerfoam S with Glutaraldehyde per litre of water to pre-cleaned surfaces. Apply with cloth, sponge, mop or mechanical coarse spray device making sure all surfaces are wetted thoroughly. Allow surfaces to remain wet for 10 minutes. All surfaces must be rinsed with clean water and allowed to dry before reuse.

BOOT/SHOE WASH: To prevent tracking harmful organisms into animal areas, shoe baths containing one inch of freshly made disinfecting solution should be placed at all entrances to building. Scrape waterproof shoes or boots and place in a 4 mL of Powerfoam S with Glutaraldehyde per litre of water solution. Allow the solution to come in contact with the boot/shoe for 10 minutes. Change the disinfecting solution when solution becomes visibly dirty.

VEHICLES: To disinfect the non-porous, hard surfaces of vehicles use a solution of 4 mL Powerfoam S with Glutaraldehyde per litre of water. Apply using a high pressure or coarse spray system. Leave all treated surfaces exposed to solution for 10 minutes or more and allow to air dry. All treated surfaces that will contact feed or drinking water must be thoroughly scrubbed with soap or detergent then rinsed with potable water before reuse.

DIRECTIONS FOR USE IN SWINE PRODUCING FACILITIES: 1) Remove all animals and feed from the premises, vehicles and enclosures. 2) Empty all troughs, racks, and other feeding and watering appliances. 3) Remove all gross soil, bedding, manure, caked on dirt, spider webs, etc. from walls to ceilings of barns, pens, stalls, chutes and other facilities occupied or traversed by hogs or other animals. 4) Thoroughly clean all surfaces with soap or detergent and rinse with water. 5) Thoroughly saturate all surfaces with a solution of 4 mL Powerfoam S with Glutaraldehyde per litre of water using conventional spraying methods. 6) Allow all treated areas to remain in contact with this solution for at least 10 minutes. 7) Immerse equipment used in handling and restraining animals, forks, shovels, and scrapers used for removing manure in Powerfoam S with Glutaraldehyde at a dilution of 4 mL per litre of water. Allow to remain in contact for at least 10 minutes. 8) Ventilate buildings and other closed spaces. Do not house swine or other livestock until treatment has been absorbed, set, or dried. 9) Thoroughly scrub treated feed racks, troughs, automatic feeders, fountains, waterers and equipment which may come in contact with food with soap or detergent and rinse with potable water before reuse.

Prior to fogging setters or hatchers, food products and packaging must be removed from the room or carefully protected. After cleaning, fog desired areas using one litre per 1000 cubic feet of room area with a product solution containing 2 to 8 litres per gallon water. Vacate all areas of personnel and poultry and feeds for a minimum of 2 hours after fogging. All food contact surfaces, including feed troughs, automatic feeders, and fountains must be disinfected followed by treatment with soap and water or detergent and rinse with potable water before reuse.

NOTE: The fog generated is very irritating to eyes, skin, and mucous membranes. UNDER NO CIRCUMSTANCES SHOULD A ROOM OR BUILDING BE ENTERED BY ANYONE WITHIN TWO HOURS OF THE ACTUAL FOGGING. If the building or room must be entered, then the individuals entering the building must wear a self-contained respirator approved by NIOSH/MSHA, goggles, long sleeves and long pants. FOGGING IS TO BE USED AS AN ADJUNCT TO ACCEPTABLE MANUAL CLEANING AND DISINFECTION OF ROOM AND MACHINE SURFACES.

STORAGE AND DISPOSAL: Do not contaminate water, food, or feed by storage and disposal. Store away from heat. Do not transfer to another container. Do not reuse empty container. PLASTIC: Triple rinse (or equivalent). Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or incineration, or, if allowed by province and local authorities by burning. If burned, stay out of smoke. PRODUCT DISPOSAL: Product wastes are acutely hazardous. Improper disposal of excess product, spray mixture, or rinsate is a violation. If these wastes cannot be disposed of by use according to label instruction, contact the manufacturer.

POWERFOAM S WITH GLUTARALDEHYDE

DANGER

KEEP OUT OF REACH OF CHILDREN: Corrosive. Causes irreversible eye damage and skin burns. Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. Harmful if swallowed or absorbed through skin. Do not get in eyes, on skin or on clothing. Do not breathe spray mist. Wear goggles or face shield. Wear a dust/mist/filtering respirator (MSHA/NIOSH approval number prefix TC-21C) or a NIOSH approved respirator with any N, P, R, or HE pre-filter. Wear protective clothing and rubber gloves. Prolonged or frequent repeated skin contact may cause an allergic reaction in some individuals. Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. Remove contaminated clothing and wash before reuse. Very toxic to aquatic life. DANGEROUS FUMES FORM WHEN MIXED WITH OTHER PRODUCTS.

FIRST AID: IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes; remove contact lenses, if present, after the first 5 minutes then continue rinsing eye; call a poison control centre or doctor for treatment advice. IF ON SKIN OR CLOTHING: Take off contaminated clothing; rinse skin immediately with plenty of water for 15-20 minutes; call a poison control centre or doctor for treatment advice. IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably by mouth-to-mouth, if possible; call a poison control centre or doctor for further treatment advice. IF SWALLOWED: Call a poison control centre or doctor immediately for treatment advice; have person sip a glass of water if able to swallow; do not induce vomiting unless told to do so by the poison control centre or doctor; do not give anything by mouth to an unconscious person. Have the product container or label with you when calling a poison control centre or doctor, or going for treatment. NOTE TO PHYSICIAN: Probable mucosal damage may contraindicate the use of gastric lavage. Measure against circulatory shock, respiratory depression and convulsion may be needed. FOR MORE INFORMATION REFER TO THE SAFETY DATA SHEET.

Manufactured by: Aaladin Superior Cleaning Systems Ltd., 71 Don Valley Parkway, Sunnyside, MB R5R 0E1

Tel.: 204 663-6618 Fax: 204 663-3125

Distributed by: Vetoquinol N.-A. Inc., 2000, ch. Georges, Lavaltrie QC J5T 3S5

NET

Code

3.78 L

459901

18.9 L

459902

205 L

459903

CPN: 1234470.0

VETOQUINOL N.-A. INC.
Commercial Division

2000, CHEMIN GEORGES, LAVALTRIE, QC, J5T 3S5
Telephone:   450-586-2252
Order Desk:   800-363-1700
Fax:   450-586-4649
Website:   www.vetoquinol.ca
Email:   info@vetoquinol.ca
Every effort has been made to ensure the accuracy of the Powerfoam S with Glutaraldehyde information published above. However, it remains the responsibility of the readers to familiarize themselves with the product information contained on the Canadian product label or package insert.

Copyright © 2021 Animalytix LLC. Updated: 2021-10-04