EmPower Foam (Canada)This page contains information on EmPower Foam for veterinary use.
The information provided typically includes the following:
- EmPower Foam Indications
- Warnings and cautions for EmPower Foam
- Direction and dosage information for EmPower Foam
EmPower FoamThis treatment applies to the following species:
foaming enzymatic spray
Prevents soils from drying onto instruments and equipment for easier, faster pre-cleaning.
- Dual enzymatic cleaner
- Reduces transport load
- Reduces exposure to soils due to splashing
- Neutral pH formula that provides advanced corrosion protection and is safe for rubber, plastic, stainless steel, carbon steel and soft metals.
IMPORTANT: Store in a cool place.
Directions For Use
For best results, spray EmPower® Foam onto instruments/equipment immediately after use. No diluting necessary.
1. Hold sprayer 6-8 inches from soiled instruments/equipment. Spray EmPower Foam evenly and directly onto instruments/equipment to ensure soils are completely coated.
2. Allow instruments/equipment to soak in EmPower Foam. Re-apply as needed to keep instruments moist.
3. Rinse instruments/equipment before further processing.
Protective eye gear, gloves and clothing MUST BE WORN, especially where exposure to blood and body fluid is expected. If accidental eye contact with EmPower Foam occurs, flush immediately with water for 15 minutes and seek medical attention. Temporary redness of the eye may occur.
Storage And Disposal
StorageKeep in a cool area.
Solution Disposal: Flush thoroughly with large quantities of water into sewage disposal system in accordance with federal, state and local regulations.
Container Disposal: Do not reuse empty container. Wrap container and put in trash.
Note: EmPower Foam is not a sterilant/disinfectant.
For product or technical information contact Metrex at 800-841-1428 or visit our web site at www.metrex.com.
METREX® RESEARCH, 28210 Wick Road, Romulus, Michigan 48174
MADE IN USA
12 x 24 fl oz bottles per case
NAC No.: 1266014.2
1717 W. COLLINS AVENUE, ORANGE, CA, 92867
|Every effort has been made to ensure the accuracy of the EmPower Foam information published above. However, it remains the responsibility of the readers to familiarize themselves with the product information contained on the Canadian product label or package insert.|
Copyright © 2017 North American Compendiums. Updated: 2017-02-06