Biofoam (Canada)This page contains information on Biofoam for veterinary use.
The information provided typically includes the following:
- Biofoam Indications
- Warnings and cautions for Biofoam
- Direction and dosage information for Biofoam
BiofoamThis treatment applies to the following species:
Foaming Descaling Detergent
Powerful foaming cleaning concentrate
Superior descaling properties
For use in food processing, hatcheries and on the farm
APPLICATION: For the removal of organic and inorganic residues particularly the build up of scale. Biofoam™ is ideal for the removal of soiling in hatcheries and processing plants where humidity can cause soil and scale build-up. Biofoam™ will also help to remove stubborn staining and soiling on factory floors and slats on livestock farms.
CompositionA synergistic blend of surfactants which combine to produce a superior foaming cleaner, preventing the build-up of scale.
Directions For Use
DILUTION RATES: In normal use Biofoam™ should be used at a dilution rate of between 0.5% - 5% dependant on soiling and scaling levels. In situations where there are thick build-ups of scaling and soil it may be necessary to use Biofoam™ at a higher concentration rate of up to 10%.
SPRAYING: Apply at a rate of 500 mL per m2 with either a knapsack sprayer or pressure washer. The pressure washer should be set on a low pressure setting (500 psi - 35 bars) using a 45 degrees jet angle. Hot water will improve the effectiveness of the product. Allow a contact time of 15 minutes prior to rinsing all surfaces thoroughly with water at high pressure (3000 psi - 207 bars). For personal comfort when spraying the product, wear a suitable mist respirator.
FOAMING: Apply at a rate of 250 mL per m2 with a pressure washer set on a low pressure setting (500 psi - 35 bars). Hot water will improve the effectiveness of the product. Allow a contact time of 15 minutes prior to rinsing all surfaces thoroughly with water at high pressure (3000 psi - 207 bars).
STAIN REMOVAL: For awkward stains and established scale build-ups, Biofoam™ may be used undiluted.
PrecautionsDo not allow product to enter any watercourses. Do not allow product to freeze.
Caution! Corrosive. May be fatal if swallowed. Harmful if inhaled. Causes severe irritation and burns to skin, eye, digestive tract and respiratory tract. May cause lung damage.
PrecautionsAvoid contact with eyes and skin. Avoid breathing vapours or mists. Wear rubber gloves and chemical splash goggle. Keep out of reach of children.
First Aid: EYE: Immediately flush with lukewarm water. Remove contact lens, if applicable, and continue flushing for 20 minutes. Obtain medical attention immediately. SKIN: Immediately flush with lukewarm water for at least 20 minutes. Obtain medical attention if irritation persists. INHALATION: If symptoms develop move victim to fresh air. If symptoms persist, obtain medical attention. INGESTION: Do not induce vomiting. Rinse mouth with water, then drink one or two glasses of water. Obtain medical attention. Never give anything by mouth if victim is unconscious or convulsing.
Refer to MSDS. Antec International Limited
Distributed by: Vétoquinol N.-A. Inc., 2000, ch. Georges, Lavaltrie, QC, Canada J5T 3S5
Manufactured by: ANTEC INTERNATIONAL LIMITED, Windham Road, Chilton Industrial Estate, Sudbury, Suffolk CO10 2XD UK.
Tel: +44 (0) 1787 377305
Fax: +44 (0) 1787 310846
© 2015 The Chemours Company FC, LLC. Biofoam™ and any associated logos are trademarks or copyrights of The Chemours Company FC, LLC. Chemours™ and the Chemours Logo are trademarks of The Chemours Company.
NAC No.: 1234248.3
2000, CHEMIN GEORGES, LAVALTRIE, QC, J5T 3S5
|Every effort has been made to ensure the accuracy of the Biofoam information published above. However, it remains the responsibility of the readers to familiarize themselves with the product information contained on the Canadian product label or package insert.|
Copyright © 2017 North American Compendiums. Updated: 2017-02-06