Skip to Content

Risk Management Standard in Medical Devices Seminar 2018

Start Date:
Thursday, 3 May, 2018
End Date:
Friday, 4 May, 2018 6:00pm
Speciality:
Business Practice, General Surgery
Website:
http://www.globalcompliancepanel.com/control/globalseminars/~product_id=901729SEMINAR?may-2018-seo-meetings4doc

Course "Risk Management in Medical Devices Industry" has been pre-approved by RAPS as eligible for up to 12 credits towards a participant's RAC recertification upon full completion.Overview: Gaps, incorrect or incomplete implementation of software can delay or make the certification/approval of medical products impossible. Most activities cannot be retroactively performed since they are closely linked into the development lifecycle.

Diligent, complete and correct implementation of risk management from the start of product development is therefore imperative. This course will introduce all necessary steps to design, implement and test critical medical device software in a regulatory compliant environment. Software risk management has to be embedded into the bigger scope of overall risk management. Therefore this course will additionally address the system level risk management and the resulting interfaces to software.To comprehensively summarize all risk related activities and to demonstrate the safe properties of a device the 'Safety Case' or 'Assurance Case' document is a well-established method to collect all safety related information together in one place.

This documentation will most likely become mandatory for all devices (currently only required for FDA infusion pump submissions). This course will introduce the basic concepts and content of safety assurance cases and will illustrate the usefulness for internal and external review of safety related information.Who will benefit:The course will introduce the main elements of risk management with emphasis on software issues and the application of risk management principles and requirements to the medical device development cycle.

Risk management has become the method of choice to ensure an effective and safety oriented device development. International consensus, reflected in globally applicable standard requirements, has led to risk management being a mandatory component of almost any activity in the medical device industry.The course will emphasize the implementation of risk management into the development and maintenance process. It will use real-life examples and proven tips and tricks to make the application of risk management a practical and beneficial undertaking.

This seminar will address the system level issues of risk management as well as the increasingly important software related issues of critical systems. It will help to comply with regulatory requirements with minimized overhead and resource burden. To make the combines effort to design, implement and verify a safe device transparent the concept of an assurance case will be introduced.The course is mainly based on international consensus requirements such as ISO14971 and IEC62304.Following personnel will benefit from the course:Senior Quality ManagersQuality ProfessionalsRegulatory ProfessionalsCompliance ProfessionalsProject ManagersDesign EngineersSoftware EngineersProcess OwnersQuality EngineersQuality AuditorsMedical AffairsLegal ProfessionalsAgenda:Day 1 ScheduleLecture 1:Introduction into Risk Management and Quality System IntegrationWhy risk management?Historical perspectiveInternational regulatory / statutory requirementsRisk Management Lifecycle and stakeholdersOver-reaching conceptIntegration into ISO13485Lifecycle stepsRisk Management BenefitsLiability issuesStreamlining product developmentImproving product safety and qualityHow to Implement Risk Management into ISO13485SOP frameworkPlanning and executionMonitoring and controlTips and tricksLecture 2:Risk Management to ISO 14971:2012Risk Management PlanningRisk Management Life CycleHazard IdentificationHazard DomainsHazard Latency IssuesRisk Rating MethodsInitial (unmitigated) Risk AssessmentMitigation Strategies and PrioritiesMitigation ArchitecturesAlarm Systems as MitigationsRisk Control BundlesPost Mitigation RiskResidual RiskSafety Integrity LevelsEuropean special requirements (Z-Annexes)Safety RequirementsHazard Mitigation TraceabilityVerification PlanningArchitectures, Redundancy and DiversityFailure Mode and Effect AnalysisTips and TricksQ&ADay 2 ScheduleLecture 1:Software Risk Management (IEC62304 / FDA software reviewers' guidance):Critical Software IssuesSoftware Hazard Mitigation StrategiesSoftware Item, Unit and System DefinitionSoftware Failures as Hazard SourcesSoftware Requirements and Design SpecificationSoftware Tools and Development EnvironmentSoftware Unit and Integration TestingReal-Time System ChallengesSoftware Verification and ValidationMitigation Traceability and EffectivenessSoftware Maintenance and Configuration ControlSoftware Risk Management Process integration into ISO14971Legacy Software issuesFDA documentation requirementsUpcoming changes in IEC62304:2014Tips and TricksQ&ALecture 2:Safety / Assurance caseSafety classesBasic Safety / EnvironmentEssential performanceDocumentation of Basic SafetyElectrical SafetyMechanical SafetyEMC / RFI safetySafety marginsDocumentation of essential performanceWhat is essential performance?Device architectures and mitigation allocationDevice specific mitigationsSoftware mitigationsExternal safetyUser intervention and alarmsOrganizational measuresLevels of protection conceptVerification of safety propertiesType testingSample testingSoftware verification testingInspectionsAnalysesAssurance case vs.

Risk Management ReportGeneral safety and hazard avoidanceDevice / application specific issuesTips and TricksQ&A SpeakerMarkus WeberPrincipal Consultant, System Safety Inc. Markus Weber, Principal Consultant with System Safety, Inc., specializes in safety engineering and risk management for critical medical devices. He graduated from Ruhr University in Bochum, Germany with a MS in Electrical Engineering. Before founding System Safety, Inc., he was a software safety engineer for the German approval agency, TUV.

Since 1991, Mr. Weber has been a leading consultant to the medical device industry on safety and regulatory compliance issues, specifically for active and software-controlled devices. In conjunction with the FDA, he has published works on risk management issues and software-related risk mitigations. Mr. Weber has helped multiple companies, from startups to Fortune 500 firms.Location: Denver, CO Date: May 3rd & 4th, 2018 and Time: 9:00 AM to 6:00 PMVenue: WILL BE ANNOUNCED SOONPrice:Price: $1,295.00 (Seminar Fee for One Delegate) Register for 5 attendees Price: $3,885.00 $6,475.00 You Save: $2,590.00 (40%)* Register for 10 attendees Price: $7,122.00 $12,950.00 You Save: $5,828.00 (45%)* Register now and save $200. (Early Bird)Until April 10, Early Bird Price: $1,295.00 From April 11 to May 01, Regular Price: $1,495.00Sponsorship Program benefits for "Risk Management Standard in Medical Devices Seminar 2018 " seminarFor More Information- https://www.globalcompliancepanel.com/control/sponsorship Contact us today!NetZealous LLC DBA GlobalCompliancePaneljohn.robinson@globalcompliancepanel.com support@globalcompliancepanel.com Toll free: +1-800-447-9407Phone: +1-510-584-9661 Website: http://www.globalcompliancepanel.com Registration Link - https://www.globalcompliancepanel.com/control/globalseminars/~product_id=901729SEMINAR?SEOFollow us on LinkedIn: https://www.linkedin.com/company/globalcompliancepanel/Like us our Facebook page: https://www.facebook.com/TrainingsAtGlobalCompliancePanel/Follow us on Twitter: https://twitter.com/GCPanel v:* {behavior:url(#default#VML);}o:* {behavior:url(#default#VML);}w:* {behavior:url(#default#VML);}.shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable{mso-style-name:"Table Normal";mso-tstyle-rowband-size:0;mso-tstyle-colband-size:0;mso-style-noshow:yes;mso-style-priority:99;mso-style-parent:"";mso-padding-alt:0cm 5.4pt 0cm 5.4pt;mso-para-margin-top:0cm;mso-para-margin-right:0cm;mso-para-margin-bottom:10.0pt;mso-para-margin-left:0cm;line-height:115%;mso-pagination:widow-orphan;font-size:11.0pt;font-family:"Calibri",sans-serif;mso-ascii-font-family:Calibri;mso-ascii-theme-font:minor-latin;mso-hansi-font-family:Calibri;mso-hansi-theme-font:minor-latin;mso-ansi-language:EN-US;mso-fareast-language:EN-US;}

Location

Courtyard by Marriott Denver Airport 6901 Tower Rd,
Denver,
Colorado,
80249

Organizer Details

Conference organized by NetZealous LLC DBA GlobalCompliancePanel

Combination products are especially challenging to register and maintain since they consist of two or more regulated components covered by different and usually independent sets of regulations in both the EU and US and various other regions.

Address:
161 Mission Falls Lane,suite 216
Phone:
8004479407
Email:
globalcompliancepanel@gmail.com

Medical conference data provided by Meetings4Docs. Report a problem >

Image Gallery

Hide