PF 300 (Canada)This page contains information on PF 300 for veterinary use.
The information provided typically includes the following:
- PF 300 Indications
- Warnings and cautions for PF 300
- Direction and dosage information for PF 300
Pf 300This treatment applies to the following species:
Disinfectant And Sanitizer For Non-food Contact Surface, Livestock Housing Facilities And Equipment
For Industrial Use Only
Didecyl Dimethyl Ammonium Chloride
For disinfecting effectively against Salmonella cholerasuis, Staphylococcus aureus and Pseudomonas aeruginosa.
For non-food contact, sanitizing effective against Klebsiella pneumoniae and Staphylococcus aureus.
Use Directions And Dilution Rates
Read entire product label, MSDS, and PF 300 Fact Sheet before use. Keep container closed when not in use. Treated surfaces must be rinsed of residual glutaraldehyde prior to contact without PPE.
Thoroughly saturate all surfaces with PF 300 solution using a foaming applicator by mixing PF 300 with water as follows:
Mix 5 mL (1:200) of PF 300 per liter of water to provide 336 ppm Didecyl Dimethyl Ammonium Chloride and 625 ppm Glutaraldehyde.
Mix 10 mL (1:100) of PF 300 per liter of water to provide 672 ppm Didecyl Dimethyl Ammonium Chloride and 1250 ppm Glutaraldehyde.
Use the following procedure for cleaning and disinfecting the housing facilities, equipment and transport vehicle interior.
1. Remove all animals and feed. Then remove all dirt, manure, debris from floor or surface.
2. Pressure wash with water to pre-clean.
3. Apply an alkaline cleaner such as JohnsonDiversey LIFT to clean the facility or surface.
4. Rinse with high pressure water.
5. Apply PF 300 (as directed) to disinfect the cleaned surface by a foaming applicator.
6. Allow the disinfected surface to air for 4 hours before admitting livestock.
DangerCorrosive. Harmful if swallowed. Harmful if inhaled. Causes irreversible eye damage. Severe skin, lung and digestive tract irritant. Prolonged or repeated skin contact may cause allergic reactions in some individuals. Causes asthmatic signs and symptoms in sensitive individuals.
PrecautionDo not get product in eyes, on skin, or on clothing. Avoid breathing mist, spray, or vapor. Do not swallow. Wear natural rubber, nitrile or butyl rubber gloves, a disposable chemical resistant full-body suit, rubber boots, and a full-face respirator fitted with a combination cartridge filter comprising a P3SL particle filter and an A2 organic vapor filter or equivalent. Wash thoroughly with soap and water after handling. Remove contaminated clothing and wash before reuse. Keep container closed.
Ventilate enclosed area when using product. Access to treated area should be prohibited without the use of suitable personal protective equipment for a minimum period of 4 hours after application.
First AidIn case of contact, immediately flush with water for 15-30 minutes. Remove contaminated clothing and wash before re-use.
If SwallowedDO NOT induce vomiting. Immediately drink one cupful of water or milk.
If Breathing Is AffectedRemove to fresh air. GIVE FIRST AID, THEN GET MEDICAL ATTENTION IMMEDIATELY.
Corrosive Liquid, Acidic, Organic, N.o.s., (glutaraldehyde), Un3265
JohnsonDiversey Canada, Inc., Oakville Ontario L6H 6P1 Canada
800 668 7171
Emergency No.: 800 668 7171
20 L (5.28 US gal)
208 L (55 US gal)
1155 NORTH SERVICE ROAD WEST, UNIT 6, OAKVILLE, ON, L6M 3E3
|Every effort has been made to ensure the accuracy of the PF 300 information published above. However, it remains the responsibility of the readers to familiarize themselves with the product information contained on the Canadian product label or package insert.|
Copyright © 2013 North American Compendiums. Updated: 2013-05-17